Steward Enterprise, Inc.
Enforcer II Oil Fortifier
Steward Enforcer II Oil Fortifier is a synthetic-based petroleum product capable of servicing the lubricating needs of many industries. The custom blend of very high viscosity index oils and additives will assist conventional lubricants. Designed for universal application, this oil additive is perfect in all oils: Motor, Hydraulic, Tractor, Gear, and others.
View Technical Data Sheet
Advantages
- Removes Engine Deposits
- Improves Compression
- Increases Oil Pressure
- Reduces Oil Consumption
- Reduces Wear
- Improves Engine Performance
- Improves Seal and Ring Performance
- Reduces Blow-by
- Inhibits Harmful Acid Build-up
- Reduces Friction
- Extends Drain Interval
Custom Blended
Steward Lubricants have a custom blend of very high viscosity index oils and additives that will assist any conventional lubricant. Designed for universal application, this oil additive is perfect in all oils: Motor, Hydraulic, Tractor, Gear and others. The purpose of this additive is two-fold: 1. To increase the viscosity of the lubricants 2. To add performance-enhancers.
Performance Properties
- Viscosity Cst @ 40C 5,000 Cst
- Viscosity Cst @100C 450 Cst
- Viscosity SUS @100F 25,000 SUS
- Viscosity SUS @210F 2,100 SUS
- Specific Gravity 0.85
- Flash Point 590 F
- Pour Point -5F
- Acid Test Excellent
- 1-H Test (M2C101B) Pass
- Piston Skirt Varnish(10=clean) 9.0
Available Sizes
- 4 x 1 Gallon Cases
- 5 - Gallon Pails
- 16 - Gallon Kegs
- 55 - Gallon Drums
Steward Enforcer II Oil Fortifier is a specially formulated blend of premium oils plus a variety of petroleum extracted additives blended together to make one product that will meet several needs, at one time, within an engine, or gear box. In most automotive applications, Steward Enforcer II Oil Fortifier is meant to be a supplement to other oils.
Benefits
The primary benefits of Steward Enforcer II Oil Fortifier are as follows: For preventative maintenance, it virtually eliminates dry starts & wear, it extends oil life and lowers oil temperature in any engine-gas or diesel. It raises oil pressure, stops smoking, leaking, knocking and blow-by in worn engines. It, also, eliminates noise, overheating, leaks and wear in gear boxes.
Since Steward Enforcer II Oil Fortifier is synthetic-based petroleum, it can safely blend with all other automotive lubricants, even synthetic oils.
The concentration of protective additives to the ratio of base oil is such that the maximum lubricity of Steward Enforcer II Oil Fortifier is attained by using it at a ratio of 10% to 60%, with other oils. At this point, the entire oil mix becomes much slicker then oil, alone. This lessening of friction allows any machine to do a given job with the use of less energy. This condition, also, creates a reduction, in temperature, which extends the life of the oils, as well as the seals, bearings and other components.
Protect Your Equipment with Enforcer II Oil Fortifier
Steward Enforcer II Oil Fortifier protects against rust, corrosion and dry starts, and from long periods of nonuse. Oil, treated with Steward Enforcer II Oil Fortifier, will not run off from the cylinders and gears. This product is a must for motor homes, combines, construction equipment, boats, military equipment, or anything else that sits idle, for long periods of time. Steward Enforcer II Oil Fortifier can be used, 80% to 100%, to correct conditions, in gear boxes, that are badly worn, leaking, overheating or operating under extreme pressure. Steward Enforcer II Oil Fortifier should be used, 100%, on open gears, or when it’s maximum climbing action is needed. It has been used, 80% to 100%, in many automotive operations where the engines were so worn that an overhaul was, otherwise imminent. It can be used, 100%, when conditions are such that the sheer pressure is so severe that other lubricants can’t hold up.
When Steward Enforcer II Oil Fortifier seals the cylinders to keep oil from going up to be burned it, also, keeps the contaminants, of the combustion chamber, from coming down to prematurely ruin the oil. This blow-by is what accelerates the wear in a worn engine. By controlling the “blow-by” and the “dry starts”, the life of an already worn engine can be extended, significantly.
Extend Oil Change Intervals
The use of Steward Enforcer II Oil Fortifier allows the oil change interval to safely be extended, by at least 50 to 100 percent. This fact, alone, pays for the product, making all other benefits a bonus. Steward Enforcer II Oil Fortifier is a perfect assembly lube. It is used by many major rebuilders. It completely adheres to the parts to eliminate the long dry start that can be detrimental to newly rebuilt engines. The adverse effects of heat in an engine or gear box is well known to anyone with even a fair degree of mechanical knowledge. Steward Enforcer II Oil Fortifier is designed to retain its viscosity (resist thinning), at high temperatures.